Western Digital Ultrastar Serv60+8 User Manual page 272

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

Step 6 : Uninstall the PSU.

a. Grasp the release lever and the metal handle in a downward pinching motion to release

the latching mechanism.

b. Pull the PSU straight out with even pressure.

Step 7 : Grasp both handles at the front of the enclosure and pull with even pressure to extend the

chassis out of the rack until it is stopped by the safety latches. The safety latches will prevent the

enclosure from coming out of the rack completely and the cover will remain in the rack attached

to the rear alignment brackets.

Figure 322: Unlatching a CMA Connector

Figure 323: Uninstalling PSU

4. Part Replacement

4.14 Chassis Replacement