Western Digital Ultrastar Serv60+8 User Manual page 354

User Guide
Step 4 : Verify the user modifications appear in the User List. The User Status and Network Privilege
changes can be viewed from the user list.
Figure 435: User added to the User List
Step 5 : Verify that the new Administrator credentials work as expected.
a. Log out of the BMC Web GUI by clicking Logout from Actions Menu in the top right-
hand corner and confirming the logout selection.
b. Log in to the BMC Web GUI.
Figure 434: User was Modified successfully
Note: If it is preferred to create a completely new administrator, disable
root as the Administrator. Select disable from the User Enable drop-
down list and save the new configuration. Create a new administrator
by following the instructions in
set the User Enable drop-down list value to Administrator.
5. System Management
Creating a New User (page 347)
5.4 BMC Web GUI
and
345