Western Digital Ultrastar Serv60+8 User Manual page 239

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

a. Ensure that the enclosure has been pulled out of the rack until the rail latches engage.

b. Find the LED pointer on the top of the drive carrier. This pointer should point toward the

front of the unit as shown in the following image.

c. Align the drive with the empty slot that will receive it. Lower it into the slot, making sure it

stays level and does not snag.

Figure 276: LED Pointer Orientation

4. Part Replacement

4.12 CMA Replacement