Western Digital Ultrastar Serv60+8 User Manual page 312

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

a. Lift the System Fan flap and look inside the empty slot that will receive the System Fan

and orient the System Fan so that the connector on the bottom of the fan is on the proper

b. Lower the fan down into the empty slot. Do not force it.

c. When the fan is fully inserted and the connectors are mated properly, close the housing

cover clip as shown in the following image.

Figure 392: Lift the System Fan Flap

Figure 393: Installing a System Fan

4. Part Replacement

4.14 Chassis Replacement