Western Digital Ultrastar Serv60+8 User Manual page 389

User Guide
2. the primary subenclosure is the subenclosure whose enclosure services process provides access
to enclosure services information of all the subenclosures; and
3. all other subenclosures are considered secondary subenclosures.
Verify Support for the Nickname Feature
Step 1 : Verify the subenclosure's support for the nickname feature by using the
command to view the subenclosure's Supported Diagnostic Pages:
p0x0
# sg_ses <device> -p0x0
<manufacturer>
Supported diagnostic pages:
Supported Diagnostic Pages [sdp] [0x0]
Configuration (SES) [cf] [0x1]
Enclosure Status/Control (SES) [ec,es] [0x2]
Help Text (SES) [ht] [0x3]
String In/Out (SES) [str] [0x4]
Threshold In/Out (SES) [th] [0x5]
Element Descriptor (SES) [ed] [0x7]
Additional Element Status (SES-2) [aes] [0xa]
Download Microcode (SES-2) [dm] [0xe]
Subenclosure Nickname (SES-2) [snic] [0xf]
<unknown> [0x10]
<unknown> [0x17]
If supported, the Subenclosure Nickname page will be included as one of the Supported
Diagnostic Pages.
View the Nickname
Step 2 : Use the
# sg_ses <device> -p0xf
<manufacturer>
Subenclosure nickname status diagnostic page:
number of secondary subenclosures: 0
generation code: 0x0
Set the Nickname
Step 3 : Use the
subenclosure's nickname:
# sg_ses <device> -p0xf -c --nickname=<nickname>
<manufacturer>
<regulatorymodel>
sg_ses <device> -p0xf
<regulatorymodel>
subenclosure identifier: 0
nickname status: 0x0
nickname additional status: 0x0
nickname language code:
nickname:
Note: In the example above, the subenclosure's nickname is set to an empty
string ("").
sg_ses <device> -p0xf -c --nickname=<nickname>
<regulatorymodel>
No errors
Note: If the nickname contains one or more spaces, enclose the name in either
single quotes (i.e. 'device nickname') or double quotes (i.e. "device nickname").
<firmwareversion>
command to view the Subenclosure Nickname page:
<firmwareversion>
<firmwareversion>
5. System Management
5.6 Subenclosure Nickname
sg_ses <device> -
command to set the
380