Western Digital Ultrastar Serv60+8 User Manual page 81

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

a. Grasp the release lever and the metal handle in a downward pinching motion to release

the latching mechanism.

b. Pull the PSU straight out with even pressure.

Step 6 : Remove the new PSU from its packaging.

Step 7 : Install the PSU.

a. Align the PSU in the orientation shown in the following image.

b. Slide the PSU into the slot until it seats fully into the chassis.

Figure 47: Uninstalling PSU

4. Part Replacement

4.3 PSU Replacement