Western Digital Ultrastar Serv60+8 User Manual page 309

User Guide
Step 54 : Install the IOM.
a.
b. Ensure that the handles on the IOM are not latched. To unlatch them, press the latch
release in the direction shown in the following image.
c. Align the IOM with the empty slot on the top of the chassis so that the arrow on the IOM
latch release is facing toward the side shown in the following image.
d. Slowly lower the IOM into the empty slot while being careful to keep it level. Do not to
force it.
Figure 386: Chassis Handle Operation
Caution: If a pin on the IOM's internal connectors is bent or damaged, the
IOM will have to be replaced. For this reason it is imperative that the IOM is
not forced into position, that it is inserted straight, and that the directions for
installing the IOM are followed exactly.
Figure 387: Unlatching IOM Handles
4. Part Replacement
4.14 Chassis Replacement
300