Western Digital Ultrastar Serv60+8 User Manual page 212

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

b. Secure the bracket to the chassis with the eight T10 Torx screws that held the bracket in

Step 15 : Install server cover panels.

a. Align and press the server panel cover into place over the server bay.

Figure 238: Add-In Card Bracket Installed

Figure 239: Add-In Card Screws

Note: The Formex material that the panel is made from is flexible and will

allow for the panel to be flexed to fit back into its original placement.

4. Part Replacement

4.11 Add-in Card Replacement