Western Digital Ultrastar Serv60+8 User Manual page 165

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

b. Insert the edge of a plastic spudger in between the CPU and Heat Sink and carefully pry

the two components apart. The plastic spudger may need to be worked around the

edges of the entire CPU and Heat Sink to separate the two parts.

Step 20 : Install the Heat Sink onto the CPU.

a. Clean the thermal compound from the top of the CPU using isopropyl alcohol and lint-free

wipes. Ensure that the CPU is residue free and dry before installing the replacement Heat

b. Align the gold triangle on the CPU with the triangle on CPU retainer and snap the CPU

into the plastic CPU retainer.

Figure 172: Removing the CPU from the Heat Sink with a Spudger

4. Part Replacement

4.9 Heat Sink Replacement