User Guide
d. Pinch the latch release and carefully press downward to seat the Drive Assembly the rest
of the way.
Step 32 : Install each drive in the place it was removed from by following the labels or marks that were
added earlier.
Step 33 : Cable the CMA(s).
CMA Standard:
a. Unlatch the elbow side of the arm(s) by pressing the blue button labeled "push," and then
swing the arm(s) open.
b. Open all of the baskets.
Figure 149: Installing a Drive Assembly
4.8 CPU and Heat Sink Module Replacement
4. Part Replacement
140