Western Digital Ultrastar Serv60+8 User Manual page 373

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

Figure 471: IPv6 Network Settings

Step 2 : Enable and configure the IPv6 Network Settings by completing the following steps:

Figure 472: IPv6 Network Settings — Enabled

a. Enable LAN Failover: The Enable LAN Failover is defaulted to disbaled. Select the

checkbox to enable this feature.

b. LAN Channel: The LAN Channel option defaults to Channel-3. Choose another option

from the drop-down list to change the value.

c. MAC Address: The MAC Address is autogenerated.

d. NIC Description: Defaulted to Dedicated to BMC Web GUI with no option to change

5. System Management

5.4 BMC Web GUI