Western Digital Ultrastar Serv60+8 User Manual page 274

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

Step 10 : Follow the previous step for each drive in the enclosure. Attach a label or mark the drives with

the drive slot they were removed from in order to add them to the same slot in the future. Store

the drives in an ESD safe location until the drives are ready to be installed back into an enclosure.

Step 11 : Uninstall the IOM.

a. Locate the latch release on the IOM and press it in the direction shown in the following

Figure 326: Removing Drive Assembly

Figure 327: Unlatching the IOM

4. Part Replacement

4.14 Chassis Replacement