User Guide
a. Open all of the basket clips on the CMA(s).
b. Remove one cable at a time from the arm, making sure not to put too much strain on the
arm.
Step 4 : Remove the CMA(s).
a. Release all of the connectors that attach the CMA(s) to the enclosure and the rail.
b. To release a connector, press the blue latch release button and pull the connector free.
Figure 284: Open Baskets
There are three total connections that need to be released, one at the elbow and two
at the opposite end.
4. Part Replacement
4.13 Rails Replacement
236