Western Digital Ultrastar Serv60+8 User Manual page 142

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

b. Secure the server cover panel using the original screws and a T7 Torx screwdriver.

Step 25 : Install the System Fan.

a. Lift the System Fan flap and look inside the empty slot that will receive the System Fan

and orient the System Fan so that the connector on the bottom of the fan is on the proper

b. Lower the fan down into the empty slot. Do not force it.

Figure 139: Server Cover Panel Screws

Figure 140: Lift the System Fan Flap

4.8 CPU and Heat Sink Module Replacement

4. Part Replacement