Western Digital Ultrastar Serv60+8 User Manual page 372

User Guide
k. Secondary DNS Server: The Secondary DNS Server is obtained by DHCP by default.
Step 3 : Save the new settings.
A message notifying that the parameters of the IPv4 Network Settings section have been
set will appear.
5.4.5.2 Configuring the IPv6 Network Settings
Note: The user is required to log in with a user that has Operator privileges or higher to
configure IPv6 Network Settings. For more information on how to log into the BMC Web GUI,
see: Logging into the BMC Web GUI (page
Step 1 : From the Menu Bar, select Configuration > IPv6 Network.
The IPv6 Network Settings window will appear.
Figure 470: Configuration Menu — IPv6 Network
The Use the following IP address option must be selected to input the secondary DNS
server.
346).
5. System Management
5.4 BMC Web GUI
363