Western Digital Ultrastar Serv60+8 User Manual page 298

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

d. Secure both M.2s with the Philips head screw that held the failed M.2s.

Step 40 : Install the add-in cards.

a. Locate the connector for the add-in card being installed.

b. Set the card edge of the add-in card on the connector and firmly press down until the

add-in card is seated.

Figure 367: M.2 Install (Top)

Figure 368: M.2 Screw

4. Part Replacement

4.14 Chassis Replacement