Power Requirements; Esd - Western Digital Ultrastar Serv60+8 User Manual

User Guide
Parameter
Quantity
Table 16: Compatible Hardware Configuration 4
Parameter
Vendor APC/Schneider
Part
Number
Quantity
1.9 Power Requirements
The following table describes the A/C input power specification for the Ultrastar Serv60+8.
Table 17: AC Power Specifications
Wattage (per power supply)
Voltage (per power supply)
Maximum inrush current (per power
Caution: The Ultrastar Serv60+8 can only be plugged into high line (220-240 VAC). If the unit is
plugged into low line (110-127 VAC), the PSU will report a "Critical" state when status pages are
queried using SES. In this case, the enclosure will power up, but the drives will not.
* Max and typical power consumption values represent the output power to the system. Input power will vary depending
on the PSU efficiency and load sharing between PSUs.
Rack PDU (Vertical)
SREXTENDER
48U (Rack
Extension)
1 rack
Rack PDU (Vertical)
Server Technology
AR3300W
412-0761-11_STV-4501
412-0761-20_STV-4502
412-0761-23_STV-4503
1 rack
Alternating Current (AC) Power Supply (2 per enclosure)
*
supply)
PDU Mounting
Bracket
2 1
PDU Mounting
Bracket
Server Technology
KIT-MBVPT-1B
(one kit per PDU)
2 2
Power
Supply Rating: 80 PLUS Platinum rated
Max Power Consumption: ~2000W
Typical Power Consumption: ~1800W
200 - 240 VAC, auto-ranging, 50/60 Hz
AC line inrush current shall not exceed 35A peak
measured per IPC-9592B(L) Appendix C-4.1.
1. Overview

1.9 Power Requirements

Additional Mounting
Bracket Hardware
N/A
Additional Mounting
Bracket Hardware
Various
4 x M6 x 16 Hex
Cap Screws
8 x M6 Fender
Washers
4 x M6 Hex Nut
with Nylon Lock
Varies
18