Western Digital Ultrastar Serv60+8 User Manual page 82

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

c. Plug the power cable into the receptacle at the back of the PSU.

d. Loop the retention clip on the PSU cables around the cable and pinch it until the clip

catches and locks in place.

e. Slide the retention clip forward until it stops near the cable connector. Doing this will

ensure that the retention clip functions properly in the event the cable is pulled on for

some reason.

Figure 48: Installing the PSU

Figure 49: Cable Retention Mechanism

4. Part Replacement

4.3 PSU Replacement