Western Digital Ultrastar Serv60+8 User Manual page 114

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

4. Part Replacement

4.7 DIMM Replacement

Figure 100: Installing a System Fan

c. When the fan is fully inserted and the connectors are mated properly, close the housing

cover clip as shown in the following image.

Figure 101: Latching the Fan Housing Closed

Step 20 : Install the remaining system fans in the same manner as the first.

Step 21 : Extend the mid-rails out of the rack so that they are protruding from the front of the rack and the

safety latches engage.