Western Digital Ultrastar Serv60+8 User Manual page 235

User Guide
Step 14 : Install the CMA(s).
a. Orient the CMA so that the elbow is on the left hand side.
b. Attach all three of the connectors to the brackets on the rails. There should be one at the
elbow side and two at the other end.
c. Slowly slide the enclosure forward to ensure the arm is operating properly, then slide it
back into the rack.
a. CMA Standard: Repeat these steps to install the upper arm with the elbow facing to the
right.
Step 15 : Cable the CMA(s).
CMA Standard:
a. Unlatch the elbow side of the arm(s) by pressing the blue button labeled "push," and then
swing the arm(s) open.
b. Open all of the baskets.
Note: CMA has one arm, to be installed at the lower position. This arm should
have the elbow on the left side.
Figure 271: CMA Orientation
4. Part Replacement
4.12 CMA Replacement
226