Western Digital Ultrastar Serv60+8 User Manual page 278

Hide thumbs Also See for Ultrastar Serv60+8:

Table of Contents

Step 16 : Uninstall the rest of the system fans in the same manner as the first.

Step 17 : Release the safety latch on the inner rails on each side of the chassis as shown in the following

Step 18 : Push the chassis back into the rack.

Step 19 : Locate the M5 thumb-screws on the top cover of the enclosure that keep it in place when the

drawer is extended, and unscrew them using a T15 Torx screwdriver. This will allow the top cover

to move freely with the enclosure when the enclosure is removed.

Figure 334: Removing System Fans

Figure 335: Inner Rail Safety Latch Release

4. Part Replacement

4.14 Chassis Replacement