Avaya Communication Server 1000M Series Upgrade page 87

Performing a data dump
Procedure 17
Performing a data dump to backup the customer database:
1 Log in to the system.
2 Insert a CF card into the active Core/Net RMD slot to back up the
database.
3 Load the Equipment Data Dump Program (LD 43). At the prompt, enter:
LD 43
.
4 When "EDD000" appears on the terminal, enter:
EDD
5 When "DATADUMP COMPLETE" and "DATABASE BACKUP
COMPLETE" appear on the terminal, enter:
****
Performing the upgrade
Load program.
EDD
Begin the data dump.
CAUTION
Loss of Data
If the data dump is not successful, do not continue;
contact your technical support organization. A data dump
problem must be corrected before proceeding.
Exit program
End of Procedure
51C to CS 1000M SG CP PIV Upgrade
Page 87 of 198