Table of Contents
Advertisement
Page 140 of 198
Switch call processing
NN43021-459
Standard 05.04
Performing the upgrade
Procedure 36
Switching call processing
1
Enter LD 135 on Core/Net 1 and issue the SCPU command. Call
processing switches to Call Server 1 and service is interrupted.
LD 135
SCPU
****
2
After Core/Net 1 initializes. log in to Core/Net 1 and verify that the cutover
was successful and that all hardware is operational. Perform acceptance
testing as required.
Core/Net 1 is now the active call processor.
Perform a customer backup data dump (upgraded release)
Procedure 37
Performing a data dump to back up the customer database:
1
Log in to the system.
2
Insert a CF card into the active Core/Net RMD slot to back up the
database.
3
Load the Equipment Data Dump Program (LD 43). At the prompt, enter:
LD 43
.
4
When EDD000 appears on the terminal, enter:
EDD
March 2012
Switch cores
Exit program
Load program.
EDD
Begin the data dump.
Advertisement
Table of Contents
