Table of Contents
Advertisement
Page 84 of 198
Performing the upgrade
Configuring IP addresses
NN43021-459
Standard 05.04
At this point the system reloads and initializes.
Procedure 15
Configuring the IP addresses
Two unique IP address are required for the CP PIV system to communicate
with the LAN. One IP address is defined for the active Core. The second IP
address is defined for the inactive Core.
1
Use the following command to check the status of the system's IP
address:
LD 117
prt host
If the system returns with host names active and inactive, go to "Check
for Peripheral Software Download to Core 1" on
returns no host names, complete the following steps:
2
Contact your System Administrator to identify IP address and subnet
mask information.
3
Configure the primary (active) and secondary (inactive) IP addresses:
LD 117
new host name 1 IP address
chg elnk active name 1
new host 'name 2' 'IP
address'
March 2012
End of Procedure
Load program
Print the configured host information
Load the program
Define the first IP address:
"name 1" is an alias for the IP
address such as "primary". The
IP address is the IP number.
Assign the "name 1" address to
the active Core.
Define the second IP address:
"name 2" is an alias for the IP
address such as "secondary".
The IP address is the IP
number.
page
85. If the system
Advertisement
Table of Contents
