Avaya Communication Server 1000M Series Upgrade page 105

Table 18
Clock Controller switch settings for NTRB53
Multi-group Machine
Single group Type #1
1 2
Multi-group = 21E = Off
Off
51, 61,
Single group = 51C, 61C
On 71, 81,
81C = On
Cable Core 0
Faceplate Cable Length
CC to CC
3
Off
Off
On
On
Inspect the NT4N29 cables
The NT4N29 cables must be installed for existing Network group 0. If the
system has XSDI cards, reinstall the cards and attach the cables. See
Figure 26 on page 106.
Install intermodule cables
Procedure 24
Installing intermodule cables
1 Locate and unpack the NT8D99AD and NT8D80BZ cables.
2 Install NT8D99AD cables between the D connectors on the backplane of
each Core/Net module. Install another NT8D99AD cable between the
E connectors on the backplane of each Core/Net module (see Figure 26
.
on page 106)
Performing the upgrade
4
Off 0-14 Ft.
On
Off
On
End of Procedure
51C to CS 1000M SG CP PIV Upgrade
Page 105 of 198
Side Machine
Number Type #2
5 6
Side 0 = 71,81 = Off
On
21E, 51, 51C,
Side 1 = 61. 61C, 81C
Off = On