Avaya Communication Server 1000M Series Upgrade page 100

Page 100 of 198
Install the Security Device
NN43021-459 Standard 05.04
Performing the upgrade
Procedure 21
Installing the Security Device
The Security Device fits into the System Utility card (see Figure 25 on
page 101).
To install the Security Device:
1 If the original system had an IODU/C, remove the Security Device from
the IODU/C for reuse.
a. Unlock the latches and remove the IODU/C card.
b. Remove the round 1/2" diameter IODU/C Security Device from the
round black Security Device holder on the top right corner of the
IODU/C card.
OR
If the original system did not have an IODU/C, use the Security
Device provided with the CP PIV Software kit.
Insert the Security Device into the Security Device holder on the
System Utility card with the "Avaya" side facing up. Do not bend the
clip more than necessary.
2 Check that the Security Device is securely in place.
March 2012
End of Procedure