Avaya Communication Server 1000M Series Upgrade page 164

Meridian 1 51c sg cp piv upgrade
Table of Contents

Advertisement

Page 164 of 198
Connecting a Signaling Server
NN43021-459
Standard 05.04
lnstalling a Signaling Server
This section contains instructions for connecting a Server to the ELAN and
TLAN subnet of a CS 1000M system. It also contains instructions for
connecting a maintenance terminal to the Server.
A Server card is inserted into a slot of a Universal Equipment Module (UEM).
UEMs do not have built-in ELAN and TLAN Ethernet ports. You must install
Ethernet ports on the back of the UEM to enable the Server to connect to the
ELAN and TLAN subnets of your Communication Server 1000 system (see
Procedure 38: "Installing ELAN and TLAN Ethernet ports on the back of a
Communication Server 1000M UEM" on
Perform Procedure 39 to connect a Server card to the ELAN and TLAN
subnets of a Communication Server 1000M system.
Connecting a Signaling Server to the ELAN and TLAN subnets of a CS
1000M system causes a service disruption.
Procedure 39
Connecting a Server Card to the ELAN and TLAN subnets of a
Communication Server 1000M system
1
Insert the end of an RJ-45 CAT5 Ethernet cable (not supplied) into the
ELAN network interface port (ELAN port) on the back of the
Communication Server 1000M UEM. (You installed this ELAN port at the
back of the UEM when you installed the Signaling Server in the UEM. For
more information, see Procedure 38: "Installing ELAN and TLAN Ethernet
ports on the back of a Communication Server 1000M UEM" on
2
Insert the other end of the RJ-45 CAT5 Ethernet cable into an Ethernet
port on the ELAN Ethernet switch.
3
Insert the end of another RJ-45 CAT5 Ethernet cable (not supplied) into
the TLAN network interface port (TLAN port) on the back of the
Communication Server 1000M UEM. (You installed this TLAN port at the
back of the UEM when you installed the Signaling Server in the UEM. For
more information, see Procedure 38: "Installing ELAN and TLAN Ethernet
ports on the back of a Communication Server 1000M UEM" on
March 2012
page
150.)
IMPORTANT!
page
150.
page
150.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cs 1000m seriesCs 1000m sgCs 1000m mg

Table of Contents