Table of Contents
Advertisement
Page 158 of 198
Figure 38
ELAN connection on Ethernet port coupler
NN43021-459
Standard 05.04
lnstalling a Signaling Server
9
Connect the server to the TLAN subnet.
a.
Insert one end of the remaining RJ-45 CAT5 Ethernet patch cable
(supplied) into the TLAN network interface (TLAN port) on the Server
faceplate.
b.
Route the Ethernet patch cable through the hole you made in the
back panel of the UEM.
c.
Plug the other end of the Ethernet patch cable into the remaining
Ethernet port coupler mounted in the Ethernet port adapter plate.
d.
Label the Ethernet port coupler as TLAN.
See Figure 39 and Figure 40.
March 2012
Advertisement
Table of Contents
