Initial Installation And Configuration; Qfx10002 Installation Overview; Overview Of Installing The Qfx10002 - Juniper QFX10002 Hardware Manual

CHAPTER 3

Initial Installation and Configuration

QFX10002 Installation Overview

Overview of Installing the QFX10002

Copyright © 2019, Juniper Networks, Inc.
QFX10002 Installation Overview on page 89
Unpacking and Mounting the QFX10002 on page 91
Connecting the QFX10002 on page 96
Registering Products—Mandatory for Validating SLAs on page 106
Configuring a QFX10000 on page 106
Overview of Installing the QFX10002 on page 89
QFX10002 Installation Safety Guidelines on page 90
You can mount a QFX10002:
Flush with the front of a 19-in. four-post rack. Use the standard mounting brackets
provided with the switch for this configuration.
Recessed 2 in. (5 cm) from the front of a 19-in. four-post rack. Use the extension bracket
provided in the standard mounting kit for this configuration. Recessed mounting is
primarily used in enclosed cabinets.
Before you begin to install and connect a QFX10002, ensure that you have reviewed the
information in "QFX10002 Installation Safety Guidelines" on page
To install and connect a QFX10002:
Follow the instructions in
1.
Determine how the device is to be mounted.
2.
Flush or recessed mounted in a rack or cabinet, see
on page 92.
Follow the instructions in:
3.
Connecting the QFX10002 to Ground on page 97
a.
"Unpacking a QFX10002" on page
"Mounting a QFX10002 in a Rack"
90.
91.
89