Qfx10002 Installation Overview; Overview Of Installing The Qfx10002 - Juniper QFX10002 Hardware Manual

QFX10002 Installation Overview

IN THIS SECTION
Overview of Installing the QFX10002 | 97
QFX10002 Installation Safety Guidelines | 98

Overview of Installing the QFX10002

Before you begin to install and connect a QFX10002, ensure that you have reviewed the information in
"QFX10002 Installation Safety Guidelines" on page
You can mount a QFX10002:
• Flush with the front of a 19-in. four-post rack. Use the standard mounting brackets provided with the
switch for this configuration.
• Recessed 2 in. (5 cm) from the front of a 19-in. four-post rack. Use the extension bracket provided in
the standard mounting kit for this configuration. Recessed mounting is primarily used in enclosed
cabinets.
To install and connect a QFX10002:
1. Follow the instructions in
2. Determine how the device is to be mounted.
Flush or recessed mounted in a rack or cabinet, see
3. Follow the instructions in:
a. "Connecting the QFX10002 to Ground" on page 105
b. "Connecting AC Power to a QFX10002" on page 110
on page 111
c. "Register Products-Mandatory to Validate SLAs" on page 116
4. Initially configure Junos OS following the instructions in
QFX10000 " on page 116
5. Set the management options for the QFX10002 device by following:
a. "Connecting a QFX Series Device to a Management Console" on page 109
98.
"Unpacking a QFX10002" on page
"Mounting a QFX10002 in a Rack" on page
99.
or "Connecting DC Power to a QFX10002"
"Performing an Initial Configuration of a
97
101.