6. Put the old battery aside.
Next steps
Install a new RAID battery.
Related topics:
Removing the server cover
Installing the RAID battery
Before you begin
Remove the existing RAID battery.
About this task
The RAID battery is located on top of the RAID controller card.
The RAID configuration data is preserved when you replace the battery.
Important:
Always use an electrostatic-discharge wrist strap or other grounding system when you work
inside the server. See
Procedure
1. Connect the battery cable to the connector on the battery.
2. Press the new battery onto the battery carrier until the clip on the side of the battery
Maintaining the Avaya S8800 Server for Avaya Aura
1
2
on page 15
Protecting against ESD damage
snaps into place. See the following figure.
Battery
Battery carrier
for more information.
®
SIP Enablement Services
Replacing the RAID battery
November 2009
35