Clearing Misfeeds; A" Paper Misfeed In The Paper Feed Section - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 186 Tuesday, January 25, 2000 3:03 PM
What to do If Something Goes Wrong
x Clearing Misfeeds
R CAUTION:
• Be careful not to cut
Note
After clearing misfeeds, make sure
that all the doors, covers, and units
are closed and the x indicator is
off.
5
To prevent misfeeds, do not leave
any torn scraps of paper, originals,
or masters in the machine.
When clearing misfeeds, do not
turn off the main switch. If you do,
your print settings will be cleared.
If misfeeds
please contact your service repre-
sentative.
"x + A" Paper Misfeed in the
Paper Feed Section
A
Remove the misfed paper.
186
yourself on any sharp
edges when you
reach inside the ma-
chine to remove mis-
fed sheets of paper or
masters.
occur repeatedly,
-To prevent paper misfeeds:
Check the following before restarting
the printing run.
• Did you select an appropriate pa-
per type with the [Ppr.Type] key?
• Are the side pads in the correct po-
sitions?
To print on thin paper (47.1g/m
12.5 lb), slide the levers behind the
paper feed side plates in the direc-
tion of the arrow (see illustration).
• When paper is curled, correct the
curl as shown.
2
,
Z066