What To Do When Things Go Wrong; Clearing Misfeeds; Others - Ricoh NC5006 Operating Instructions Manual

WHAT TO DO WHEN THINGS GO WRONG
WHAT TO DO WHEN THINGS
GO WRONG
When there is a machine failure or a paper misfeed, a message will appear on the touch
panel display. Follow the instructions to solve the problem,
Clearing Misfeeds
When a paper misfeed occurs, the misfeed location will
Check the misfeed location and follow the instructions.
the machine door,)
appear on the touch panel display.
(Also follow the instructions inside
WARNING: Since some parts of the copier are supplied with high electrical
voltage, touch only the parts specified in the instructions inside the
machine door.
WA RN/NG: When removing misfed paper from section " D", use caution. The
fusina unit miaht be vew hot.
Notes:
c1
IJ
c1
Do not leave any torn scraps of paper within the
After removing misfed paper, make sure that all
that all covers and doors are closed.
machine.
units and levers are returned to their original positions and
If a paper misfeed occurs, the copier automatically keeps track of the selected copy modes and how many
orlgmals have been completed. It is unnecessary to reset the copy quantity, or the copy modes, after removing
misfed paper.
Others
Problem
1
Action
Nothing happens when the Q Check the power cord. If it is not plugged in properly,
main switch ISturned on. plug it firmly into the outlet.
The Start key does not Q Check the touch panel display and follow the
change from red to reen
f
instructions.
within 12 minutes a er the
main switch is turned on, or
the machine stops during a
copy run.
9-3