Auto Cycle-Making Master And Prints In One Operation - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 59 Tuesday, January 25, 2000 3:03 PM
Auto Cycle—Making Master and Prints in
one Operation
Use the {Auto Cycle} key to process
masters and make prints in a single
operation.
Note
When you use the optional docu-
ment feeder, it is not necessary to
place originals one by one. All
originals are fed and prints are
completed after you press the
{Start} key.
A
Set your original on the exposure
glass (contact glass) or in the op-
tional document feeder.
Note
You can set up to 30 originals
into the optional document
feeder.
B
Enter the number of prints re-
quired with the Number keys.
C
Press the {Start} key.
Auto Cycle—Making Master and Prints in one Operation
D
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key (see ⇒ P.34 "Adjusting
the Position of Printed Images").
E
Press the {Auto Cycle} key.
F
Press the {Print} key.
Note
Repeat steps A through C until
all originals are printed when
you are setting originals on the
exposure glass (contact glass).
If you set the original in the op-
tional document feeder, origi-
nals are fed and prints are
completed automatically.
1
59