Changing The Paper Size In Tray 2; Changing The Paper Size In The External Tray - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 17 Tuesday, January 25, 2000 3:03 PM
Changing the Paper Size in
Tray 2
A
Slide out tray 2 and remove any
remaining paper.
B
While squeezing in the side fence
release lever, slide the fence fully
out.
C
Load the new paper.
Note
Make sure the paper stack fits
snugly against the right side of
the tray.
Make sure that the top of the
stack does not exceed the limit
mark on the side fence.
Load paper with the side to be
printed on facing down.
Changing the Paper Size
D
While squeezing in the side fence
release lever, slide in the fence to
match the paper size.
E
Slide the tray back in.
Note
Make sure that the size and di-
rection of paper you have load-
ed match that shown on the
panel display.
Changing the Paper Size in the
External Tray
A
Press the External Tray Down
key.
1
TPEH130E
17