Ricoh Priport JP5800 Operating Instructions Manual page 181

Ruby-gb3_FM.book Page 161 Tuesday, January 25, 2000 3:03 PM
2 Reset Counters
3 Reg. User Code
4 Chg. User Code
5 Del. User Code
6 Key Operator
Code
7 Reg/Chg KeyOp-
Code
8 Restricted Access In Key Counter mode, you have to set the key counter be-
You can clear each or all user code counters.
Note
Default: Single
Reference
For how to clear the number of masters and copies, see
⇒ P.176 "6-2 Reset Counters".
You can register user codes.
Note
Up to 20 user codes (up to 4 digits) can be registered.
You can change user codes.
Note
The number of copies made under the old code is add-
ed to that made under the new user code.
Reference
For how to change the user codes, see ⇒ P.177 "6-4
Chg. User Code".
You can delete user codes.
Note
The number of copies made under the deleted code is
also deleted.
Reference
For how to delete user codes, see ⇒ P.178 "6-5 Del.
User Code".
Use to turn Key Operator Code mode on or off.
Note
Default: Not to use
You can register or change key operator codes. (up to 4
digits)
fore making prints. (To turn on Key Counter mode, con-
tact your service representative.) If Key Counter mode is
on, Restricted Access is turned on ("To use") automati-
cally. If you turn Restricted Access off ("Not to use"), you
can make prints without inserting the key counter.
Note
Default: Not to use
User Tools Menu
4
161