Ricoh Priport JP5800 Operating Instructions Manual page 166

Ruby-gb3_FM.book Page 146 Tuesday, January 25, 2000 3:03 PM
User Tools
C
Change the settings by following
the instructions on the panel dis-
play. Then press the [OK] key.
Note
To change the value entered,
press the {Clear/Stop} key before
pressing the [OK] key. Then en-
ter the new value.
[Cancel]: Press to return to the
previous menu without chang-
ing any data.
D
Press the {User Tools} key to re-
4
turn to the standby display.
Note
The settings are not canceled
even if the main switch is
turned off or the {Clear Modes/
Energy Saver} key is pressed.
You can also return to the stand-
by display by pressing the [Can-
cel] key.
146