Auto Class Mode- Making Variable Numbers Of Prints From The Same Original Using Stored Data - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 62 Tuesday, January 25, 2000 3:03 PM
Operation
Auto Class Mode— Making Variable
Numbers of Prints from the Same Original
Using Stored Data
1
Preparation
You have to store the number of
students in each class with the user
tools. See ⇒ P.163 "3-5 Class Enter
No.".
Use the {Class} key to make sets of
prints from the same original. The
stored numbers of prints are made for
each set.
This feature is useful for teachers who
frequently make multiple print sets
for their classes, ex. notes, handouts,
tests etc.
Using a standard print function, the
teacher would have to stand by the
machine entering the number of
prints and pressing the {Print} key for
each class. However, Auto Class
mode allows you to store the number
of students in each class into the ma-
chine memory beforehand with the
user tools. Then, whenever you need
to make print sets for several classes,
set your original, select the classes
who need prints and press the {Start}
key. Print sets will be made contain-
ing the correct number of prints for
each class.
62
Note
When you set Auto Class mode,
Job Separation mode is automati-
cally turned on. The job separator
pulls the top sheet of the each set
delivered to the paper delivery
tray to mark the end of each print-
ed set. The next cycle begins auto-
matically.
Separation—Separating Printing Sets
in the Paper Delivery Tray".
You can cancel Job Separation
mode in Auto Class mode with the
user tools (see "Auto Separate" ⇒
P.152 "4. Mode Setting").
A
Press the {Class} key.
B
Select [By-class] with the [→] or
{}} key.
GRCLAS2E
C
Press the [OK] key.
⇒
See P.85 "Job
1 2 3 4 5
TPES160E