Photo Mode Printing - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 56 Tuesday, January 25, 2000 3:03 PM
Operation
G
Press the {Start} key.
1
H
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key (see ⇒ P.34 "Adjusting
the Position of Printed Images").
I
Make your prints.

Photo Mode Printing

A
Press the [Original] key.
B
Select [Photo] with the [→] or {}}
key.
56
C
Press the [OK] key.
D
Select the screen coarseness with
the [←] [→] or {~} {}} keys.
Note
Four coarseness settings are
available:
• Setting 4: coarsest
• Setting 3: coarser than setting
2
• Setting 2: coarser than setting
1
• Setting 1: coarser than the
standard setting
E
Press the [OK] key.
F
Adjust the lightness with the [←]
[→] or {~} {}} keys.
G
Press the [OK] key.
H
Set your original on the exposure
glass (contact glass) or in the op-
tional document feeder.