Ricoh Priport JP5800 Operating Instructions Manual page 113

Ruby-gb3_FM.book Page 93 Tuesday, January 25, 2000 3:03 PM
E
Press the {q} key.
F
Enter the desired number of
prints for the second original
with the Number keys.
G
Press the {q} key.
Note
Repeat steps F and G for each
original.
The number of prints for up to
20 originals can be stored.
H
Press the [OK] key.
I
Set your originals face up in the
document feeder.
Note
The originals are fed from the
top of the stack. Make sure that
the originals are set in the cor-
rect sequence with the first orig-
inal on the top.
J
Press the {Start} key.
K
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key (see ⇒ P.34 "Adjusting
the Position of Printed Images").
L
Press the {Auto Cycle} key.
Note
In Auto Cycle mode, printing
starts automatically after a trial
print is delivered.
TPEH350E
Optional Document Feeder
2
93