Ricoh Priport JP5800 Operating Instructions Manual page 177

Ruby-gb3_FM.book Page 157 Tuesday, January 25, 2000 3:03 PM
No. Mode
24 Tray Display
25 Jogger
26 Auto Paper Se-
lect
27 Adjusting
sharpness of
letters
Description
By default, when you open the external tray it becomes the
selected paper tray. This is useful if you only use the exter-
nal tray for printing onto specific types of paper that can-
not be set in the other trays e.g. thick paper, thin paper and
envelopes. However, if you wish to use the external tray
for standard paper types and have it treated just like trays
1 and 2, choose "2 Trays + External Tray".
• 2 Trays
When you open the external tray it becomes the selected
paper tray. To print on paper from tray 1 or 2, you must
close the external tray. See ⇒ P.24 "Printing from the Ex-
ternal Tray".
• 2 Trays + External Tray
When the external tray is open, you can select any of the
three trays. In addition, all three trays become available
for the "Limitless Feeding" function. ⇒ P.152 "4. Mode
Setting".
Note
Default: 2 Trays
When "2 Trays + External Tray" is selected, you cannot
select the paper type for the external tray and make
prints on thin paper, thick paper or envelopes.
You can set priority for the image or aligning the prints
when using the sorter.
Note
Default: Every page
You can configure the Auto Paper Select function to be ac-
tivated or deactivated even when the main switch is turned
on or the {Clear Modes/Energy Saver} key is pressed.
Note
Default: ON
Adjusts the sharpness of text in Letter mode.
Note
Default: Standard
When "Thin Lettering" is selected, shadows of pasted
originals might appear on prints.
User Tools Menu
4
157