Loading Paper In Tray 2 - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 184 Tuesday, January 25, 2000 3:03 PM
What to do If Something Goes Wrong
Place the paper with the side
to be printed on face down.
When the right side of tray 1 is
empty
When the paper in the right side
of tray 1 runs out, "Papers are
moving to from left to right" is
shown on the panel display and
the paper placed in the left side
of tray 1 moves to the right side.
A If the following display ap-
pears when you make prints
5
using tray 1, you can slide out
the left side of tray 1 and load
paper.
Note
Do not slide out tray 1 while
the paper is moving from left
to right.
Make sure that the top of the
stack is not higher than the
limit mark on the side fence.
Load the paper on the left
side.
Place the paper with the side
to be printed on face down.
184
C
Slide in tray 1.

Loading Paper in Tray 2

When tray 2 is empty, the following
display appears:
A
Slide out tray 2.
B
Load the paper.
Important
Make sure that the top of the
stack is not higher than the limit
mark on the side fence.
Make sure the right side of the
tray makes light contact with
the paper.
Make sure that the paper size
and direction shown on the
panel display match the size
and direction actually loaded in
the paper feed tray.
C
Slide in tray 2.