Clearing Misfeeds; Check The Misfeed Location Display - Ricoh FT4018 Operating Instructions Manual

$
CAUTION: When removing misfed paper ,do not touch the fus-
NOTE: Since some parts of the copier are supplied with high electrical volt-
age, touch only the parts specified in the instructions on the sticker
inside the machine's cover.
NOTE: Do not leave any torn scraps of paper within the machine.
NOTE: When clearing misfeeds, do not turn off the main switch. If you do,
your copy settings are cleared.
NOTE: After clearing misfeeds, make sure that all units and levers are re-
turned to their original positions and all covers are closed.
NOTE: Do not touch originals in the optional document feeder when a pa-
per misfeed occurs in the copier. If you do, the copier cannot know
which originals have been copied, and which should be copied.
NOTE: If a paper misfeed occurs when paper is fed from the tray, do not
pull out the tray before clearing misfeeds.

Check The Misfeed Location Display

The display shows the location of
misfed paper.
ing section because it could be very hot.

CLEARING MISFEEDS

Check
Paper Size
1
/ 14
2
Tray
CLEARING MISFEEDS
Ready
Wait
51