Ricoh Priport JP5800 Operating Instructions Manual page 133

Ruby-gb3_FM.book Page 113 Tuesday, January 25, 2000 3:03 PM
To change the value entered,
press the {Clear/Stop} key and
enter the new value.
J
After you have finished designat-
ing modes for all the command
sheets, select [Outside Area] with
the [←] [→] or {~} {}} keys.
K
Select the mode for the outside
area with the [←] [→] or {~} {}}
keys.
L
Press the [OK] key.
Note
When you select Photo mode
for both inside and outside are-
as, you cannot select different
coarseness and image density.
When you want to confirm your
settings, press the {Make-Up}
key twice. Then press the [OK]
key repeatedly until the panel
display reaches the setting you
want to confirm.
M
If you have selected Photo mode,
select the coarseness and the im-
age density with the [←] [→] or
{~} {}} keys.
Note
Four coarseness settings are
available:
• Setting 4: coarsest
• Setting 3: coarser than setting 2
• Setting 2: coarser than setting 1
• Setting 1: coarser than the
standard setting
N
Press the [OK] key.
O
Set the first command sheet face
down on the exposure glass (con-
tact glass) and press the {Start} key.
The beeper sounds after the com-
mand sheet is scanned.
Note
Repeat step O for the other com-
mand sheets.
P
Set the original face down on the
exposure glass (contact glass) and
press the {Start} key.
Make-up Printing
2
113