Set Operation Mode - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 149 Tuesday, January 25, 2000 3:03 PM

2. Set Operation Mode

No. Mode
1 Min. Quantity
2 Max. Quantity
3 CopyCount
Display
5 Panel Beeper
6 LCD Contrast
7 Delivery Ca-
pacity
Description
The minimum print quantity can be set between 0 and 9999.
Example: If you specify 20 as minimum number of prints,
runs of 20 or more prints will be accepted, runs of less than
20 prints will not be accepted.
Note
Default: 0
The maximum print quantity can be set between 0 and
9999.
Note
Default: 9999
The counter can be set to show the number of prints made
(Up), or the number of prints remaining to be made
(Down).
Note
Default: Down
Turns the beeper on or off.
Note
Default: STD. (standard)
Available settings:
• ALL OFF (The beeper does not sound when you
press keys or when warning messages appear on the
panel display.)
• STD. (When you press a key, the beeper does not
sound. When warning messages appear on the panel
display, the beeper sounds.)
• ALL ON (The beeper sounds when you press a key or
when warning messages appear on the panel dis-
play.)
You can adjust the brightness of the panel display.
You can set the maximum number to make prints.
Note
Default: Yes (1000 sheets)
User Tools Menu
4
149