Directional Magnification (Size)-Stretching And Squeezing The Image Into The Copy Area - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 48 Tuesday, January 25, 2000 3:03 PM
Operation
Directional Magnification (Size)—
Stretching and Squeezing the Image into
the Copy Area
1
Use this function to have the machine
select suitable reproduction ratios
based upon the dimensions of the
print you require, and the size of the
original you specify.
1
2
1: Horizontal original size
2: Vertical original size
3: Horizontal print size
4: Vertical print size
Note
You can enter the sizes within the
following ranges:
Metric ver-
sion
Inch ver-
sion
The range of ratios from which the
machine can select depends on
where you set the original:
• On the exposure glass (contact
glass): 50-200%
• In the optional document feed-
er: 50–155%
48
3
4
CP2M01EE
1 - 999mm (in 1mm
steps)
0.1" - 99.9" (in 0.1"
steps)
If the calculated ratio is over the
maximum or under the minimum
ratio, it is corrected within the
range of the ratio automatically.
A
Press the [Ratio] key.
B
Select [Mag.] with the [→] or {}}
key.
C
Press the [OK] key.
D
Select [Direct.Mag.(Size)] with the
[→] or {}} key.
E
Press the [OK] key.