Table of Contents
Advertisement
CLEARING MISFEEDS
R CAUTION:
The fusing section of this equipment might be very hot. You should
be very careful that you don't touch this section when removing the
misfed paper.
NOTE: Since some parts of the copier are supplied with high electrical volt-
age, touch only the parts specified in the instructions on the sticker
inside the machine's cover.
NOTE: Do not leave any torn scraps of paper within the machine.
NOTE: When clearing misfeeds, do not turn off the main switch. If you do,
your copy settings are cleared.
NOTE: After clearing misfeeds, make sure that all units and levers are re-
turned to their original positions and all covers are closed.
NOTE: Do not touch originals in the optional document feeder when a pa-
per misfeed occurs in the copier. If you do, the copier cannot know
which originals have been copied, and which should be copied.
NOTE: If a paper misfeed occurs when paper is fed from the tray, do not
pull out the tray before clearing misfeeds.
Check The Misfeed Location Display
The display shows the location of
misfed paper.
52
KF2Jr-AE-7
CLEARING MISFEEDS
Hide quick links:
Advertisement
Table of Contents
