Printing In Two Colors - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 97 Tuesday, January 25, 2000 3:03 PM
J
Close the front door.
Note
Make sure that the Open Cover/
Unit indicator turns off, and the
Color Drum indicator lights.

Printing in Two Colors

After printing in one color, you can
print in another color on the same
side of the print.
R
Note
Leave the prints for a while before
printing on them again to let the
ink dry.
If the prints are not dry, the paper
feed roller might become dirty. In
this case, wipe the roller with a
cloth.
You cannot print in two colors at
one time.
You cannot place paper that has al-
ready been printed on in tray 1 or
tray 2. Place it in the external tray
instead.
R
P P
GRCOLO0E
Color Printing Using the Optional Color Drum
A
Prepare the two originals. Set the
first original on the exposure
glass (contact glass).
B
Enter the number of prints with
the Number keys.
C
Press the {Start} key.
D
Check the image position of the
trial or proof print.
Note
If the image position is not cor-
rect, adjust it using the [Image
=] key (see ⇒ P.34 "Adjusting
the Position of Printed Images").
2
TPEH270E
97