Ricoh Priport JP5800 Operating Instructions Manual page 155

Ruby-gb3_FM.book Page 135 Tuesday, January 25, 2000 3:03 PM
Setting your original (K) on the exposure glass (contact glass)
A Set your original as shown in the illustration.
Setting your originals (K) in the optional document feeder
A Set your originals as shown in the illustration.
Note
The first original should be on the top.
G
Press the {Start} key.
Note
Even if the number of originals is less than the number required in the se-
lected mode, prints can be made as shown in the illustration. In this case,
press the {q} key after all the originals have been scanned.
1
2
3
When setting an original on the exposure glass (contact glass) or one sheet
at a time in the optional document feeder, repeat steps F and G. After set-
ting the last original, press the {q} key then the {Start} key.
Memory Combine—Combining Originals into one Print with the Memory Board
TPEH270E
TPEH281E
1 2
3
GRMCOM3E
2
135