Closing The External Tray - Ricoh Priport JP5800 Operating Instructions Manual

Ruby-gb3_FM.book Page 26 Tuesday, January 25, 2000 3:03 PM
Operation
When the wings are up, de-
pending on the paper you are
using you might not be able
to load the tray to full capac-
ity (1,000 sheets).
1
When you make prints on
thin paper at high speed, de-
livery misfeeds (x+C indi-
cator) might occur. If this
happens, do the following:
• Reduce the print speed.
See ⇒ P.37 "Changing the
Printing Speed".
• Lower the paper align-
ment wings.
• Adjust the paper delivery
end plate.
Printing onto A4K, 8
B5L paper
A Before printing onto A4K,
" × 11"K, or B5L with a
1
8 /
2
thinness of 81.4g/m
less, swing out the trailing
edge guides.
Note
The direction to swing out
the trailing edge guides for
each paper is shown in the il-
lustration.
26

Closing the External Tray

Close the external tray after using it.
A
Slide in the extender if it is out.
" × 11"K,
1
/
2
2
, 21.6 lb or
B
Move the paper feed side plates to
their maximum width.
TPEH310E
A4K or B5L others
×
1
"
8 /
2
" K
11